UV Care - SM Mall of Asia

UV Care Super Power UV Vacuum

This is a vacuum cleaner with UV-C Light technology, pulsating pads, optimized suction and HEPA filter. The wavelength of the UV-C lamp is 253.7 nm which can kill up to 99.9% of germs, viruses, microbes, dust mites, and bed bugs. The UV light breaks down the DNA in the microorganisms, the pulsating pads loosen dust mite matter and dirt trapped within fabrics, the optimized suction eliminates particles and the HEPA filter captures common allergens such as dust, pollen, pet dander and dead skin cells.

Range of Application:

Beds, Mattresses, Pillows, Sofas, Clothing, Fabrics, Bed Sheets, Blankets, Duvets, Upholstery, Carpets, Rugs and Play Mats Do not use directly on skin or animals.

Features:

Powerful UV-C Lamp
Medical-grade, high-efficiency HEPA Filter
NOTE: Filter/s are not washable
Two safety wheel switch to prevent exposure to UV-C light
Rechargeable Lithium Battery
High Power UV Lamp: 31 cm
Rated Power: 100W
Rated Voltage: 18.5W
Vacuum: 5kPa
Noise: 70dB
Dust Cup Capacity: 0.5L
Product Dimensions: 41 cm (L) x 32 cm (W) x 20 cm (H)
Weight: 1.4kg
Comes with 1 year Local Supplier Warranty
How to Use:

Press the power button to turn on the unit
Place the vacuum flat on the bed or surface. This will then turn on the UV-C lamp. You will be able to check if the UV-C light is working through the light indicator on the machine.
Glide the vacuum back and forth on your bed or sofa to clean
There is an overheat protector inside the motor. When the temperature goes up too high, it will automatically shut down to protect the motor and machine. You must rest the machine for about half an hour to restart again.
How to Clean the Dust Cylinder and HEPA Filter:

Turn off the machine
Carefully pull out the dust cylinder
Use water to clean the dust cylinder. Rinse the filter to clean or use a small brush to remove stubborn dust and dirt.
Make sure that the dust cylinder and filter is completely dry before installing back to the machine. Never install a wet dust cylinder or wet filter to the machine as this will damage the motor.
Clean the dust cylinder and filter every after use. This will help to prolong the machine life.
If the UV Lamp is dirty, air out the dust and use a soft cloth with alcohol to wipe clean
How to Charge:

Plug the power adapter to the charging base
Place the vacuum cleaner into the charging base to charge
Maintenance:

There is an overheat protector inside the motor. When the temperature goes up too high, it will automatically shut down to protect the motor and machine. You must rest the machine for about half an hour to restart again.
Avoid touching the UV lamp with your fingers because the stain will affect the sterilization.
Regularly clean the HEPA filter and contact your authorized dealer for filter replacement.
Please do not open or disassemble the machine as this will void your warranty.
Safety:

Ultraviolet radiation does not cause skin cancer or cataract, but it may irritate eyes and skin. Never stare directly and never expose your skin to the UV-C Light.
Please use a soft, dry cloth to clean the machine. Never use sharp objects to scrape of the dust around it.
Terms and Conditions:

Outright Replacement for Factory Defects: Seven (7) days.
A. If purchased through a physical retail channel, you may return and replace your unit directly at the store.
B. If purchased through the website, you may return and replace your unit at our Service Center. All shipping and handling charges will be shouldered by UV Care.
Customer to shoulder shipping charges to and from the Service Center beyond 7 days.
Our unit comes with one (1) year limited warranty for service and parts, three (3) months for the bulb.
The warranty does not cover unusual wear and tear, damage resulting from accident, unreasonable use of product, unauthorized repairs, products that have been removed of its serial number, and products that have been modified or misused in any way.